How do I reset my Fisher and Paykel dishwasher if the buttons are not responding?
To reset your Fisher and Paykel dishwasher if the buttons are not responding, follow these steps:
First, turn off the dishwasher at the time you want to run it from the ‘Switch off’ (Power) button or ‘Off’ (Button) on the control panel. Ensure it’s completely switched off to avoid any accidental starts.
Next, identify the buttons on your specific model dishwasher, which usually include:
– Start/Stop button
– Throat area buttons (if not found on the main panel)
– Door Lock button
Press the Start/Stop button until the display lights indicate ‘Dishwasher stopped’. This confirms the action you’ve taken was executable.
Carefully open the left-hand door to access the filter compartment and the spray arm holes.
Inspect the filter and its connections for any blockages, ensuring no food debris or water airlocks obstruct airflow to the spray arm.
If a blockage is found, clean the filter gently with tap water and mild soap to clear the debris.
If the blockage persists, you may need to drain and clean the dishwasher, but consult your Fisher and Paykel manual for guidance specific to your model.
Press the Throat area buttons to ensure all spray arm holes are activated and water flows freely.
Store the dishwasher’s filters and parts after cleaning to maintain efficiency and prevent grime accumulation.
Re-close the left-hand door, ensure the dishwasher is securely locked in place, and then press the Start/Stop button to verify it has reset successfully.
What should I do if my Fisher and Paykel dishwasher is not draining properly?
If your Fisher and Paykel dishwasher is not draining properly, don’t worry, you’re not alone in this issue. A faulty drainage system can be a frustrating problem that requires some troubleshooting to resolve. To start, make sure the dishwasher is filled to its maximum capacity, and then run a cleaning cycle to help clear any debris and food particles that may be clogging the drain.
Here are some steps to follow to diagnose and potentially fix the issue:
1. Check the drain hose: Inspect the drain hose for any kinks, twists, or sagging that could be restricting water flow. Verify that the hose is securely connected to both the dishwasher and the sink drain.
(Optional